Inspect-able, no ‘remove by’ date
Magnetic Snap-Back Technology, re-connection guaranteed
Resists "hydraulic hammer" problems
UL/ULC Listed
CARB Certified
Meets NFPA 30A Codes
BSPP and BSPT threads available upon request
CACTM75
Inspect-able, no ‘remove by’ date
Magnetic Snap-Back Technology, re-connection guaranteed
Resists "hydraulic hammer" problems
UL/ULC Listed
CARB Certified
Meets NFPA 30A Codes
BSPP and BSPT threads available upon request
CACTM75-E85
Inspect-able, no ‘remove by’ date
Magnetic Snap-Back Technology, re-connection guaranteed
Resists "hydraulic hammer" problems
UL/ULC Listed
CARB Certified
Meets NFPA 30A Codes
BSPP and BSPT threads available upon request
CACTM100
Prevents Accidental Pump Pull Over - Save on costly repairs and down time
Positive Seal - When released both the hose and pump side are sealed, preventing spills
Separation - Separates at 250 lbs of pull
HR75200
Prevents Accidental Pump Pull Over - Save on costly repairs and down time
Positive Seal - When released both the hose and pump side are sealed, preventing spills
Separation - Separates at 300 lbs of pull
HR75300
Prevents Accidental Pump Pull Over - Save on costly repairs and down time
Repairable - Easy to re-connect for minimal downtime, just push and twist until it clicks
Molded Construction - for longer service life
Separation - Separates at 250 lbs of pull
HR75500
The OPW 66V Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.
OP66V0300
The OPW 66V Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.
OP66V0492
The OPW 66V Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.
OP66V1350
Light-weight, inexpensive and disposable.
Instant-closing dual poppet check valve design
Separates at less than 300 lbs.
HU002273
Compatible with unleaded, diesel and all Ethanol blends through E85.
Unit is lightweight, inexpensive and disposable.
Features same instant closing dual poppet check valve design as Model 006360.
Maximum separation of 300 lbf / 1334.5 N.
HU006273
Retains UL listing after reconnection.
Internal pressure balancing chamber prevents "line shock" nuisance separations.
Separates at less than 200 lbf / 889.6 N which minimizes "backlash" force of separation, reducing damage to equipment.
HU002276